• Leading site supervision of installation inspections / checks, testing and commissioning works at site, monitoring and surveillance of compliance to quality standards, specifications. Managing issuing NCRs for deficiencies/noncompliance, identifying snags and management / monitoring of snags closure.

• Developing Testing and Commissioning Plans, procedures, schedules as required.

• Managing review and approval of Testing & Commissioning Method Statements for each systems & equipments.

• Managing and participating in review and approval process of Inspection and Test Plans (ITPs) of each systems & equipments, O&Ms, As Built documentation etc

• Managing Site acceptance testing (SAT) witness and certification process for all equipment and systems. Reviewing functional test data for evidencing compliance with performance specifications and other standards. Reporting on testing and inspection results and coordinating for Engineer/ consultant's sign off /certification of the relevant systems/sub systems as applicable.

• Coordinating with Construction manager, Project Manager and contractors for Inspection of respective systems/subsystem's and documentations of functional testing record sheet for disciplines.

• Coordinating with contractors for schedule of vendor attendance at site for critical equipment, complex system packages and monitoring the vendor presence as per schedule to be prepared and agreed during project execution.

• Reviewing and monitoring availability of required consumables spares for the pre commissioning testing, commissioning and operation etc.

• Participating /conducting Safety reviews, safety hazard identification and mitigation planning with Contractors.

• Coordinating with contractors to ensure that site acceptance tests (SAT) and inspection of works are carried out as stated in the performance specifications, ITPs

• Following up & coordinating with consultants for all 3rd party inspection review of testing & certification as applicable.

• Managing and coordinating preparation of system for punch listing activities, reviewing and following up with Contractors/ consultants for the close out of punch list items, through time bound corrective action/review. Expediting/following up with the respective engineers involved in the completion of individual system punch lists .

• Managing the Lockout & Tag out activities as per approved procedure.

• Leading and attending regular construction/commissioning meetings on follow up for Pre commissioning/ commissioning activities, reviewing and following up areas of concern in the contractors preparedness/resources with regard to commissioning schedules .

• Preparing regular inputs for progress and forecast reports on relevant construction completion, pre-commissioning & commissioning, start up, etc. to project management.

• Coordinating /reviewing with contractors & relevant stakeholders for preparation of Operation & Maintenance manual,

• Develop Training Plans and coordinate., manage training activities in coordination with the Project Management Team

• Managing and ensuring handing over of the facilities to the user including all as built documentation and facilitating smooth occupation in liaison with Post occupation facility management entity including necessary training, as required for the End User/Asset holder.

• Participating in project close out activities.

• 主導現場施工監督,包括安裝檢查、測試與試車作業,並監控與稽核其是否符合品質標準及規範。負責出具不符合報告(NCR),識別缺失並管理、追蹤缺失的關閉狀況。

• 擬定測試與試車計畫、程序與排程。

• 管理各系統與設備之測試與試車施工方法書(Method Statements)的審查與核准流程。

• 管理並參與各系統與設備的檢驗與測試計畫(ITPs)、操作與維護手冊(O&M)、竣工圖(As-built)等文件的審查與核准作業。

• 管理設備與系統的現場驗收測試(SAT)見證與認證流程;審查功能測試數據以確認其符合性能規範與相關標準;彙整測試與檢查結果,並協調工程師/顧問的簽核作業。

• 與施工經理、專案經理及承包商協調,進行各系統/子系統的檢驗工作,並負責功能測試紀錄文件的管理。

• 協調承包商安排重要設備、複雜系統組件之供應商到場時程,並依事前溝通及專案執行排程監控其出席情況。

• 審查與監控試車前測試、試車及運轉所需的耗材與備品的準備狀況。

• 參與或主持安全審查,協助承包商進行安全風險識別及改善計畫。

• 協調承包商確保現場驗收測試(SAT)及各項檢查依照性能規範及 ITP 要求執行。

• 與顧問及第三方檢測單位追蹤並協調測試與認證相關的審查與簽核流程。

• 管理系統之查驗清單(Punch List)準備作業,並審查與追蹤承包商/顧問的改善進度,以確保事項能依時程關閉;並督促相關工程師完成各系統的 Punch List。

• 依照核准程序管理設備/系統的上鎖掛牌(Lockout & Tagout)作業。

• 主導或參與定期施工/試車會議,追蹤試車前與試車相關活動,並檢視承包商在資源與準備度方面是否能符合試車排程要求。

• 提供施工完成、試車前測試、試車、啟動等相關進度與預估資訊給專案管理團隊。

• 與承包商及利益關係人協調與審查操作及維護手冊(O&M Manual)的編製。

• 制定培訓計畫,並與專案管理團隊協調管理相關訓練活動。

• 管理並確保設施妥善移交給使用端,包括完整的竣工文件(As-built)與必要的使用者培訓,並與後續設施管理單位合作,確保順利入住及啟用。

• 參與專案收尾相關活動。

Firstline Field Service Technician

Safety Engineer

Commissioning Manager